This is our high range model in the manual machine. This model is successful for little sort of workshop works, and production for machining small types of items
The HLM-L-08 Lathe Machine model is additionally entirely reasonable for Mechanical workshops for any type, manufacturing, repairing, production houses, or tutoring. The understudy can figure out how to play and work from this machine.
The user-friendly controls are intuitive and easy to operate. Managing material on the Lathe Machine is finely machined with chrome and grind which make it easy to operate. Safety Covers are installed to make users safe from hazards. We offer our machines in two conditions, 1- Plug & Play Type which includes all previous installation and running work. 2- Non-Plug & Play. In this type, the end-user has to install and turn in all pre-running work on his own.
We have provided a detailed overview of our all products on this website. Please check the mechanism and feature & accuracy tolerance of this lathe machine model below. For specifications & accessories please view the next tab.
The Mechanism of the Machine is a complete Belt and Manual system. Daily Oiling is the major part of the keeping machine safe for precise work.
The machine has a Norton gear which can be used for threading in Millimeter and BSP Standard.
This Lathe Machine also has a carriage saddle with a feed control system.
Cross Slide & Travel Slide can be run on automatic feed control. Else tool slide has only a manual working system.
The Lathe machine has a conventional belt-type headstock. For speed changing, you have to change belts manually.
For More details & specifications please view the technical specification tab
In the Local Machine tool industries, we are the only manufacturers of lathe machines that is providing the lowest geometrical accuracy tolerance overall in lathe machine working.
The value ranges from 0.05 ±.Allignment:0.05± mm – 0.1± mm, UP-Down:0.03± mm – 0.05± mm , Facing: 0.05±
|Whole Machine length|
|02||Bed Width||13″- 325 mm||Total width of bed frame V-V|
|03||Center Height||15″- 375 mm||Half center of the total Height bed from to headstock|
|04||Spindle Bore||4.5″ – 112 mm||Headstock spindle hole for shaft moving|
|05||Swing Over Bed||30″- 750 mm||Workpiece turning dia over the bed frame|
|06||Swing Over Cross slide||21″ [ 525 mm ]||Workpiece turning dia over the cross slide.|
|07||Spindle Speeds||08 Nos||04- Double Slow, 04- Single Fast|
|08||Thread range MM||
1 to 16.5
|These are the millimeters threads which range 1 to 16.5 total 19 kind|
|09||Thread range Inches||
2 to 30
|These are the standard inches threads0 which range 2 to 30 total 44 kind|
|10||Led Screw TPI||16″ [ 400 mm ]||Type of Led Screw Thread ” 2TPI OR 4TPI”|
|11||Tail Stock MT||MT-3||Morse Taper in tailstock quill.|